Use when a task needs the judgment of an Automotive Engineering Technician — setting up and instrumenting test equipment (strain-gauge bridges, thermocouples, load/torque sensors) to an engineer's written test plan, selecting DAQ sample rate and an SAE J211 CFC filter class for a vehicle test channel, verifying instrument calibration (torque wrench, thermocouple, load cell, shunt-cal check on a strain bridge) against a traceable standard before a test run, reducing dyno or road-load test data (SAE J1349 power correction, rainflow-counted durability damage fraction) into engineering units, and documenting test results against the engineer's target with stated margin. Distinct from an automotive engineer (owns the system-level design decisions — structure, powertrain sizing, suspension geometry, NVH) — this role installs the sensors, configures the DAQ, executes the instrumented test, and reduces the data under a design and test plan the engineer specified.
Install with
Claude CodeCodexCursorGitHub CopilotGemini CLI
Supported by the Atlas install prompt. Skill-specific requirements vary.
Skill stats
Skills1CategoryEngineeringStars0
About this skill
Use when a task needs the judgment of an Automotive Engineering Technician — setting up and instrumenting test equipment (strain-gauge bridges, thermocouples, load/torque sensors) to an engineer's written test plan, selecting DAQ sample rate and an SAE J211 CFC filter class for a vehicle test channel, verifying instrument calibration (torque wrench, thermocouple, load cell, shunt-cal check on a strain bridge) against a traceable standard before a test run, reducing dyno or road-load test data (SAE J1349 power correction, rainflow-counted durability damage fraction) into engineering units, and documenting test results against the engineer's target with stated margin. Distinct from an automotive engineer (owns the system-level design decisions — structure, powertrain sizing, suspension geometry, NVH) — this role installs the sensors, configures the DAQ, executes the instrumented test, and reduces the data under a design and test plan the engineer specified.
Quick start
Copy the install prompt. Use the green button above this README.
Send it to your agent. Paste it into your coding agent’s chat and send.
Review the setup. Your agent checks the skill’s instructions, requirements, and installation scope.
Use when a task needs the judgment of an Automotive Engineering Technician — setting up and instrumenting test equipment (strain-gauge bridges, thermocouples, load/torque sensors) to an engineer's written test plan, selecting DAQ sample rate and an SAE J211 CFC filter class for a vehicle test channel, verifying instrument calibration (torque wrench, thermocouple, load cell, shunt-cal check on a strain bridge) against a traceable standard before a test run, reducing dyno or road-load test data (SAE J1349 power correction, rainflow-counted durability damage fraction) into engineering units, and documenting test results against the engineer's target with stated margin. Distinct from an automotive engineer (owns the system-level design decisions — structure, powertrain sizing, suspension geometry, NVH) — this role installs the sensors, configures the DAQ, executes the instrumented test, and reduces the data under a design and test plan the engineer specified.
About this listing
Category
Engineering
Reported license
MIT
Listing language (estimated)
English
Review status
Not individually reviewed
Agent compatibility
Atlas installation supports Claude Code, Codex, and Cursor. Skill-specific dependencies and features are checked during setup.
Claude Code
Codex
Cursor
GitHub Copilot
Gemini CLI