Claude Code
Codex
Cursor
GitHub Copilot
Gemini CLIAbout this skill
当用户需要创建 PetaLinux 工程、配置 Linux 内核/rootfs/U-Boot、编写设备树(system-user.dtsi)、添加自定义应用程序 recipe、构建嵌入式 Linux 镜像、打包 BOOT.BIN 启动镜像、生成 WIC SD 卡镜像、部署到 SD 卡/QSPI、通过 QEMU 仿真启动、通过 JTAG 下载调试、动态加载 FPGA 比特流、或解决 PetaLinux 构建/版本问题时使用此技能。涵盖 petalinux-create、petalinux-config、petalinux-build、petalinux-package 全流程命令。当用户提及嵌入式 Linux、Yocto、meta-user、kernel config、rootfs 配置、u-boot、FSBL、PMU firmware、ATF、FIT image、设备树覆盖或 Zynq/MPSoC/Versal Linux 系统构建时触发。如需生成 XSA 文件使用 vivado-synth 和 vivado-impl,如需编写时序约束使用 vivado-constraints,如需硬件调试使用 vivado-debug,如需 PYNQ 镜像构建使用 pynq。
Quick start
- Copy the install prompt. Use the green button above this README.
- Send it to your agent. Paste it into your coding agent’s chat and send.
- Review the setup. Your agent checks the skill’s instructions, requirements, and installation scope.
Review, license & listing details
This is an imported listing. We haven’t certified its safety, license, or compatibility. Skills may include executable scripts.
Only SKILL.md was scanned. Supporting files and scripts were not checked. No safety grade has been assigned.
0 potential findings · Scanned 11/4/2026 · Scanner 0.2.1
Content SHA-256: fe8610828dd6de049747288a58cc2f574fa656e9347f7150c775865dd4d17b09
About this listing
- Category
- Product & design
- Reported license
- GPL-2.0
- Listing language (estimated)
- Chinese
- Review status
- Not individually reviewed
- Agent compatibility
- Atlas installation supports Claude Code, Codex, and Cursor. Skill-specific dependencies and features are checked during setup.